Singapore IMDA Certification

 Singapore IMDA Certification


I. Scope of Certification



Telecommunications and radio communication equipment sold in Singapore for local use must be registered with IMDA.


Applicable Scope: All radio and telecommunications terminal products


Examples: Terrestrial mobile radio equipment; mobile/IoT base stations; wireless broadband access equipment; Internet of Things (IoT) devices; dedicated short-range equipment;


Ultra-wideband (UWB) equipment; SRD equipment*


II. Certification Cycle:


There are five product registration types based on product category. The first four are valid for five years and renewable, while voluntary certification is valid indefinitely.


1. ESER Self-Declaration Registration


Short-range/Low-power devices (SRD/LPD), such as alarms, RFID, radio detection, field paging and vehicle radar systems, remote controls, telemetry, wireless microphones and video transmitters, wireless LAN and Bluetooth; DECT cordless phones, portable mobile radios (PMR446) and multi-channel portable radios (MCR446), power below 500 mW


DVB-T2 integrated receiver/decoder (such as DVB-T2 set-top boxes, integrated digital TVs, vehicle receivers)


Complex multi-line devices (such as PABX, KTS, ISDN, PABX, PSTN, PLC)


2. SER - Self-Declaration Registration


Mobile terminal equipment/broadband access equipment


3. GER - Evaluation Registration** (commonly used)


GER For Mobile/IoT Base Station/Repeater Systems


Land Mobile Radios/Walkie-Talkies


TV Blank Band Equipment


UWB


DSRC


IoT User Equipment


Short Range Equipment (SRD)*


4. GER-CB Assessment Registration


Equipment owned by a CB applicant who has obtained MRA Phase II accreditation.


5. COFC - Voluntary Registration


Applicable to telecommunications equipment that does not require approval for sale (equipment exempt from registration), such as fax transceivers, etc.


The process takes approximately 1-2 weeks:


Preparing application materials: 1-2 days


Online application submission (review): 3-5 days


Paying application fees: 1 day


Official certificate issuance: 2-3 days


III. Sample Quantity: NA


IV. Certification Label Requirements


-Compliance Label


Content:


Complies with IMDA Standards:


【DAXXXXXX】 (This code is the importer's (local company's) telecommunications supplier license code)


Size: 17mm*9mm (Fixed size, no scaling allowed)


Location: Product itself, instruction manual, or packaging (preferred products)


Setting Method: Physical/Electronic Tagging (If E-Labeling is used, the display method of the electronic tag must be indicated in the user manual accompanying the product)


V. Requirements for Certificate Holder:


Singapore local importer (If the customer currently does not have an actual importer, a proxy can hold the certificate)


VI. Application Documents:


Document List (General):


1. Instruction Manual


2. Technical Specifications


3. Internal and External Photos


4. CE Report


5. EU DOC/RED Certificate

评论

发表评论

此博客中的热门博文

Power Bank Safety Upgrade: First Mandatory National Standard Issued

图片
 Power Bank Safety Upgrade: First Mandatory National Standard Issued my country's first mandatory national standard, the "Technical Specification for Safety of Power Banks," was published on March 31, 2026, and will officially take effect on April 1, 2027. This standard aims to end long-standing problems in the power bank industry, such as falsely advertised capacity, substandard battery cells, and frequent safety incidents. The new regulation introduces several stringent technical requirements, mandating that battery cells pass a needle penetration test (without catching fire or exploding), and strengthening thermal abuse testing; it also adds tests for whole-device drop and crushing, requires products to be labeled with a safe service life, and improves various protection mechanisms.
阅读全文

EN IEC 62680-1-3/62680-1-2 EU Electronics Standards

图片
To reduce e-waste, the EU is committed to promoting a unified charging technology and interface that supports a variety of electronic products. On November 23, 2022, the EU issued Directive EN IEC 62680-1-3/62680-1-2, requiring electronic product manufacturers to use USB-C charging interface technology in their products. It also requires small and medium-sized portable electronic devices such as mobile phones, tablets, and cameras, as well as laptops, to comply with the USB-C charging interface requirement by 2024 and 2026, respectively. The IEC 62680 testing equipment GRL-USB-PD-C2-EPR, formerly the USB-IF Association's USB PD certification testing instrument, performs PD protocol certification testing. IEC 62680-1-2 and IEC 62680-1-3 incorporate the USB-IF USB PD and Type-C specifications and are currently used for protocol testing and certification corresponding to IEC 62680. IEC 62680-1-2 primarily defines the USB PD power supply specification; IEC 62680-1-3 is a specification ...
阅读全文

What is FDA Certification & What is FDA Registration?

图片
 What is FDA Certification & What is FDA Registration? I. What is the FDA? The FDA, authorized by the U.S. Congress (the federal government), is the highest law enforcement agency specializing in food and drug regulation. Its full name is the Food and Drug Administration. Strictly speaking, there is no such thing as FDA certification; the FDA itself has stated this. Generally, when people talk about FDA certification, they are referring to the following three types: FDA registration, FDA testing, and FDA approval. ① FDA Registration: Companies exporting food, drugs, and medical devices to the United States must register with the FDA, listing their company and products. Otherwise, customs clearance will be denied; this is a mandatory requirement. ② FDA Testing: FDA testing primarily refers to safety testing of food contact materials, testing of product contact packaging, biocompatibility testing of medical products, and clinical safety testing. ③ FDA Approval: This usually appli...
阅读全文