Thailand NBTC

 Thailand NBTC


I. Scope of Certification



Controlled Products: All wireless communication products


According to Thailand's Advanced Radio Communications Act, controlled products are divided into the following three categories:


Class A Equipment: Land mobile radio communication equipment (microphones, radio controls); satellite communication equipment (GMPCS); other types of radio communication equipment (vehicle-mounted radar); linear communication equipment


Class B Equipment: Amateur radio equipment; land mobile radio communication equipment; cellular mobile devices; maritime mobile radio communication equipment; aviation mobile radio communication equipment; wide area bandwidth wireless access equipment


SDoC Equipment: Equipment not listed above, subject to NBTC control, such as: general Bluetooth, WIFI products; SRD equipment


II. Certification Cycle:


From complete documentation:


Class A Registration: 3 weeks


Class B Approvel Certification: 3 weeks


SDoC Supplier Declaration of Conformity Certification: 3-5 business days


III. Sample Quantity: For products without special requirements, certification transfer is sufficient.


IV. NBTC Certification Marking Requirements:


- Warning Statement


1. Compliance Mark


Location: Product Packaging/Instruction Manual:


Content: (Class...) A/B mandatory, SDoC recommended)


“เครื่องโทรคมนาคมและอุปกรณ์นี้มีความสอด คล้องตามมาตรฐานหรือ ข้อกำหนดทางเทคนิคของ กสทช.”


(Translation: This telecommunications equipment complies with NBTC technical standards.)


2. Safety Warning Label


Location: Product packaging/instruction manual:


Content: Mandatory for products requiring SAR/EMF testing (i.e., for radio communication equipment whose electromagnetic radiation components are close to the user's head or less than 20 cm away from the human body during normal use); this label is not required if the product's RF output power does not exceed 100 mW EIRP (suggested to include).


“เครื่องวิทยุคมนาคมนี้มีระดับการแผ่ คลื่นแม่เหล็กไฟฟ้ าสอดคล้ องตามมาตรฐานความปลอด ภัยต่อสุขภาพของมนุษย์ จากการใช้ เครื่องวิทยุคมนาคมที่คณะกรรมการกิจการโทรคมนาคมแห่ งชาติประกาศกําหนด”


(Translation: The electromagnetic field strength of this radio communication equipment complies with the "Safety Standards for the Use of Radio Communication Equipment to Human Health" published by the National Telecommunications Commission.)


-Class A/Class B label (applicable to Class A/Class B devices)


Location: Product body/packaging/instruction manual


Composition: NBTC logo + device class (Class A/Class B) + NBTC ID


The NBTC ID consists of: (Grade A certificate number YYYYYY-ZZ) / (Grade B certificate number AAAAAA-BBB) + a four-digit ID (XXXX) assigned to the certificate holder by NBTC.


Acquisition method: NBTC issues these labels uniformly; unauthorized printing and use are prohibited. When products are imported into Thailand, distributors can apply to NBTC to purchase these labels. The label cost is 1 Thai Baht per label (excluding tax).


- License-Exempt Radio Communication Equipment Label (Applicable to all certified equipment)


Location: Instruction manual/packaging or as an add-on page inside the packaging


Obtaining Method: Templates are provided on the NBTC website; companies can use them directly.


V. NBTC Requirements for Certificate Holders:


A Thai company holding the certificate is required. It is recommended that the actual importer apply. If not, a local agent company can be used to hold the certificate.


This does not involve factories.


VI. Application Documents


-Importer Qualification Documents (can be ignored if held by a third party):


Power of Attorney (POA) of the Thai importing company


Copy of the signatory's ID card


Affiliation of the importing company


NBTC Supplier Card


VAT Certificate


NBTC Trade Permit


-Product Specifications


-Product Photos


-CE/FCC Test Report


-Related Declarations


VII. Certification-Related Notes


-WLAN Technical Standards:


-Radio Test Report:


- 2.4-2.5 GHz: EN300 328 V2.1.1 or newer or FCC Part 15.247


- 5.15-5.35GHz : ETSI EN 301 893 V2.1.1 or newer or FCC Part 15.407 (For indoor application only)


- 5.47-5.725GHz : ETSI EN 301 893 V2.1.1 or newer or FCC Part 15.407


- 5.725-5.85GHz : EN302502, FCC 15.247 or FCC 15.407. (EN300440 is not acceptable by NBTC)


- 5.925-6.425GHz : FCC 15.407 only


-Safety report IEC/EN60950 or IEC/EN62368


-MPE or EMF test report (Required if output power over 20dBm e.i.r.p)


-module RF test report (if any)




Power limits and allowed frequency bands


2.4-2.5 GHz: 0.1 W e.i.r.p.


5.150-5.350 GHz : 0.2 W e.i.r.p. (10mW/MHz 0.25mW/25kHz) (For indoor application only)


5.470-5.725 GHz: 1 W e.i.r.p. (50mW/MHz)


5.725-5.850 GHz: 1 W e.i.r.p.


5.925-6.425GHz: 250mW e.i.r.p.(12.5mW/MHz) (For indoor application only);5.925-6.425GHz: 25mW e.i.r.p. (1.25mW/MHz) (For indoor/outdoor devices)


*Currently, 6G in Thailand only supports 5.925-6.425GHz. FCC reports must only include 5.925-6.425GHz; content related to 6.425-7.125GHz is prohibited.

评论

发表评论

此博客中的热门博文

Power Bank Safety Upgrade: First Mandatory National Standard Issued

图片
 Power Bank Safety Upgrade: First Mandatory National Standard Issued my country's first mandatory national standard, the "Technical Specification for Safety of Power Banks," was published on March 31, 2026, and will officially take effect on April 1, 2027. This standard aims to end long-standing problems in the power bank industry, such as falsely advertised capacity, substandard battery cells, and frequent safety incidents. The new regulation introduces several stringent technical requirements, mandating that battery cells pass a needle penetration test (without catching fire or exploding), and strengthening thermal abuse testing; it also adds tests for whole-device drop and crushing, requires products to be labeled with a safe service life, and improves various protection mechanisms.
阅读全文

EN IEC 62680-1-3/62680-1-2 EU Electronics Standards

图片
To reduce e-waste, the EU is committed to promoting a unified charging technology and interface that supports a variety of electronic products. On November 23, 2022, the EU issued Directive EN IEC 62680-1-3/62680-1-2, requiring electronic product manufacturers to use USB-C charging interface technology in their products. It also requires small and medium-sized portable electronic devices such as mobile phones, tablets, and cameras, as well as laptops, to comply with the USB-C charging interface requirement by 2024 and 2026, respectively. The IEC 62680 testing equipment GRL-USB-PD-C2-EPR, formerly the USB-IF Association's USB PD certification testing instrument, performs PD protocol certification testing. IEC 62680-1-2 and IEC 62680-1-3 incorporate the USB-IF USB PD and Type-C specifications and are currently used for protocol testing and certification corresponding to IEC 62680. IEC 62680-1-2 primarily defines the USB PD power supply specification; IEC 62680-1-3 is a specification ...
阅读全文

What is FDA Certification & What is FDA Registration?

图片
 What is FDA Certification & What is FDA Registration? I. What is the FDA? The FDA, authorized by the U.S. Congress (the federal government), is the highest law enforcement agency specializing in food and drug regulation. Its full name is the Food and Drug Administration. Strictly speaking, there is no such thing as FDA certification; the FDA itself has stated this. Generally, when people talk about FDA certification, they are referring to the following three types: FDA registration, FDA testing, and FDA approval. ① FDA Registration: Companies exporting food, drugs, and medical devices to the United States must register with the FDA, listing their company and products. Otherwise, customs clearance will be denied; this is a mandatory requirement. ② FDA Testing: FDA testing primarily refers to safety testing of food contact materials, testing of product contact packaging, biocompatibility testing of medical products, and clinical safety testing. ③ FDA Approval: This usually appli...
阅读全文