TISI Certification in Thailand

 TISI Certification in Thailand



Certification Introduction:


TISI is short for the Thai Industrial Standards Institute. TISI is a department under the Thai Ministry of Industry, responsible for developing standards to meet domestic and international needs, monitoring product quality, and conducting conformity assessment procedures to ensure compliance with standards and accreditation. TISI is the government authority for mandatory certification in Thailand, as well as a standards development and management body, a certification body, and a laboratory accreditation, personnel training, and registration body. It is important to note that Thailand does not have any non-governmental mandatory certification bodies.


Thailand implements a TISI certification system that combines mandatory and voluntary certification. Products that meet the standards are allowed to use the TISI mark. For products for which standards have not yet been developed, TISI also provides product registration as a temporary certification method.


The Thai Industrial Standards Institute (TISI) develops standards to meet the needs and development of national industry, businesses, the economy, government, and society, as well as government policy support, consumer protection, and environmental and natural resource protection. TISI offers product certification programs, including two certification marks: a voluntary certification mark and a mandatory certification mark.


image.png


Basic Certification Information:


• Mandatory: A combination of mandatory and voluntary certification


• Regulated Products: Electrical and electronic products as defined by regulations


• Factory Inspection: Yes


• Certificate Validity: 3 years


• Local Agent: Required


Applicable Product Scope:


TISI standards cover technical specifications, product characteristics, product performance, raw material quality, and testing procedures. Currently, over 2,000 standards cover many consumer products, such as food, electrical appliances, vehicles, and building materials. The Thai government requires mandatory certification for 60 major product categories across 8 sectors, including: electrical equipment and accessories, medical devices, building materials, daily consumer goods, vehicles, PVC pipes, LPG gas containers, and agricultural products. Certification for other product categories is voluntary.

评论

发表评论

此博客中的热门博文

Power Bank Safety Upgrade: First Mandatory National Standard Issued

图片
 Power Bank Safety Upgrade: First Mandatory National Standard Issued my country's first mandatory national standard, the "Technical Specification for Safety of Power Banks," was published on March 31, 2026, and will officially take effect on April 1, 2027. This standard aims to end long-standing problems in the power bank industry, such as falsely advertised capacity, substandard battery cells, and frequent safety incidents. The new regulation introduces several stringent technical requirements, mandating that battery cells pass a needle penetration test (without catching fire or exploding), and strengthening thermal abuse testing; it also adds tests for whole-device drop and crushing, requires products to be labeled with a safe service life, and improves various protection mechanisms.
阅读全文

EN IEC 62680-1-3/62680-1-2 EU Electronics Standards

图片
To reduce e-waste, the EU is committed to promoting a unified charging technology and interface that supports a variety of electronic products. On November 23, 2022, the EU issued Directive EN IEC 62680-1-3/62680-1-2, requiring electronic product manufacturers to use USB-C charging interface technology in their products. It also requires small and medium-sized portable electronic devices such as mobile phones, tablets, and cameras, as well as laptops, to comply with the USB-C charging interface requirement by 2024 and 2026, respectively. The IEC 62680 testing equipment GRL-USB-PD-C2-EPR, formerly the USB-IF Association's USB PD certification testing instrument, performs PD protocol certification testing. IEC 62680-1-2 and IEC 62680-1-3 incorporate the USB-IF USB PD and Type-C specifications and are currently used for protocol testing and certification corresponding to IEC 62680. IEC 62680-1-2 primarily defines the USB PD power supply specification; IEC 62680-1-3 is a specification ...
阅读全文

What is FDA Certification & What is FDA Registration?

图片
 What is FDA Certification & What is FDA Registration? I. What is the FDA? The FDA, authorized by the U.S. Congress (the federal government), is the highest law enforcement agency specializing in food and drug regulation. Its full name is the Food and Drug Administration. Strictly speaking, there is no such thing as FDA certification; the FDA itself has stated this. Generally, when people talk about FDA certification, they are referring to the following three types: FDA registration, FDA testing, and FDA approval. ① FDA Registration: Companies exporting food, drugs, and medical devices to the United States must register with the FDA, listing their company and products. Otherwise, customs clearance will be denied; this is a mandatory requirement. ② FDA Testing: FDA testing primarily refers to safety testing of food contact materials, testing of product contact packaging, biocompatibility testing of medical products, and clinical safety testing. ③ FDA Approval: This usually appli...
阅读全文