What is Canadian IC certification? IC ID authentication

 What is Canadian IC certification? IC ID authentication



IC stands for Industry Canada, a government agency responsible for certifying electronic and electrical products entering the Canadian market. Similar to the FCC of Midea, IC currently only imposes restrictions on electromagnetic interference. General regulations: Only EMI is mandatory, and the certification method is the same as FCC. Self verification, compliance, and certification can be used.


IC ID: CN (Company Number, up to 6 digits)+UPW (UniqLle Product Number, up to 8 digits) Free application, but must have Canadian representative address information.


Scope of IC Product Certification IC ID Certification


Its responsible products are roughly divided into: broadcasting and television equipment, information technology equipment, radio equipment, telecommunications equipment, engineering and medical equipment, etc.


IC certification, factory inspection, IC ID certification


No factory inspection required


IC Certification Notice: IC ID Certification


Wireless products need to apply for IC (ID) wireless IC certification for IC production. If the customer has not filed for IC certification, the time will be 5 working days longer than usual.


IC certification documentation preparation IC ID certification


1. Product manual;


2. Circuit diagram, PCB diagram.

评论

发表评论

此博客中的热门博文

Power Bank Safety Upgrade: First Mandatory National Standard Issued

图片
 Power Bank Safety Upgrade: First Mandatory National Standard Issued my country's first mandatory national standard, the "Technical Specification for Safety of Power Banks," was published on March 31, 2026, and will officially take effect on April 1, 2027. This standard aims to end long-standing problems in the power bank industry, such as falsely advertised capacity, substandard battery cells, and frequent safety incidents. The new regulation introduces several stringent technical requirements, mandating that battery cells pass a needle penetration test (without catching fire or exploding), and strengthening thermal abuse testing; it also adds tests for whole-device drop and crushing, requires products to be labeled with a safe service life, and improves various protection mechanisms.
阅读全文

EN IEC 62680-1-3/62680-1-2 EU Electronics Standards

图片
To reduce e-waste, the EU is committed to promoting a unified charging technology and interface that supports a variety of electronic products. On November 23, 2022, the EU issued Directive EN IEC 62680-1-3/62680-1-2, requiring electronic product manufacturers to use USB-C charging interface technology in their products. It also requires small and medium-sized portable electronic devices such as mobile phones, tablets, and cameras, as well as laptops, to comply with the USB-C charging interface requirement by 2024 and 2026, respectively. The IEC 62680 testing equipment GRL-USB-PD-C2-EPR, formerly the USB-IF Association's USB PD certification testing instrument, performs PD protocol certification testing. IEC 62680-1-2 and IEC 62680-1-3 incorporate the USB-IF USB PD and Type-C specifications and are currently used for protocol testing and certification corresponding to IEC 62680. IEC 62680-1-2 primarily defines the USB PD power supply specification; IEC 62680-1-3 is a specification ...
阅读全文

What is FDA Certification & What is FDA Registration?

图片
 What is FDA Certification & What is FDA Registration? I. What is the FDA? The FDA, authorized by the U.S. Congress (the federal government), is the highest law enforcement agency specializing in food and drug regulation. Its full name is the Food and Drug Administration. Strictly speaking, there is no such thing as FDA certification; the FDA itself has stated this. Generally, when people talk about FDA certification, they are referring to the following three types: FDA registration, FDA testing, and FDA approval. ① FDA Registration: Companies exporting food, drugs, and medical devices to the United States must register with the FDA, listing their company and products. Otherwise, customs clearance will be denied; this is a mandatory requirement. ② FDA Testing: FDA testing primarily refers to safety testing of food contact materials, testing of product contact packaging, biocompatibility testing of medical products, and clinical safety testing. ③ FDA Approval: This usually appli...
阅读全文