What is GITEKI (TELEC) certification?

 What is GITEKI (TELEC) certification?



GITEKI certification, commonly known as TELEC certification, is the same certification as the same product (simply different names) exported to Japan under the Japanese Radio Wave Law. Products with Bluetooth/Wi-Fi or other wireless functions must have TELEC certification.


GITEKI certification, MIC certification, and Technical Support Mark certification can all be considered equivalent to TELEC certification.


TELEC certification is a Japanese wireless certification that regulates wireless products, including those with wireless capabilities such as Wi-Fi, Bluetooth, 2G, 3G, and 4G. Examples include common mobile phones, tablets, wireless headphones, and Bluetooth speakers. TELEC certification does not require a local representative or local testing. The cost varies depending on the product's communication frequency band and module; specific costs are related to the channel and frequency band.


What products require TELEC certification?


WiFi 2.4G


WiFi 2.5G


Bluetooth


2.4GHz band


10GHz band


315GHz band


902-928GHz band


2G/3G/4G products


PS: 433MHz and 868MHz products do not require TELEC certification. Additionally, TELEC certification does not cover 2.9GHz and 5.8GHz for consumer use, so these are also not required.


What documents are required for TELEC certification?


1. Service Application Form


2. User Manual


3. Circuit Schematic


4. Block Diagram


5. PCB LAYOUT


6. PCB Placement


7. Operation Description (Explanation of the block diagram or circuit diagram)


8. Bill of Components (BOM LIST)


9. Antenna Report


10. Fixed-Frequency Prototype, Software, and Test Fixtures


11. ISO 9000 Certificate


TELEC Certification Timeline: 15-20 working days, approximately 3-4 weeks.


TELEC Testing Standards: TELEC's testing standards follow MIC (Ministry of Internal Affairs and Communications, Japan) Notice No. 88, available at: http://www.tele.soumu.go.jp/j/material/test.htm. Updates and maintenance of the testing standards are also handled by MIC.


The testing items for WiFi and Bluetooth products are basically similar to the European standard EN300 328. For 2.4GHz WiFi products (802.11b/g, 2412-2472MHz) and Bluetooth products, the standard used is MIC Notice No. 88 Annex 43. However, for channel 14 (2471-2497MHz) of 2.4GHz WiFi products, separate testing and reporting using Annex 44 are required.


For 5GHz WiFi products (802.11a, 5180~5320MHz, W52 Band and W53 Band), the testing standard is Annex 45. However, it should be noted that information indicates MIC will soon revise Annex 45 to include 5.6GHz devices (Band W56) and impose stricter DFS testing requirements on the Band 56 band.


TELEC Certification Mark


How should the TELEC certification logo be designed?


Customization based on customer's sample:


1. Sample size larger than the palm of your hand: MIC logo diameter 5mm;


2. Sample size smaller than the palm of your hand: MIC logo diameter 3mm;


PS: R indicates equipment type. The product type is noted on the certificate.

评论

发表评论

此博客中的热门博文

Power Bank Safety Upgrade: First Mandatory National Standard Issued

图片
 Power Bank Safety Upgrade: First Mandatory National Standard Issued my country's first mandatory national standard, the "Technical Specification for Safety of Power Banks," was published on March 31, 2026, and will officially take effect on April 1, 2027. This standard aims to end long-standing problems in the power bank industry, such as falsely advertised capacity, substandard battery cells, and frequent safety incidents. The new regulation introduces several stringent technical requirements, mandating that battery cells pass a needle penetration test (without catching fire or exploding), and strengthening thermal abuse testing; it also adds tests for whole-device drop and crushing, requires products to be labeled with a safe service life, and improves various protection mechanisms.
阅读全文

EN IEC 62680-1-3/62680-1-2 EU Electronics Standards

图片
To reduce e-waste, the EU is committed to promoting a unified charging technology and interface that supports a variety of electronic products. On November 23, 2022, the EU issued Directive EN IEC 62680-1-3/62680-1-2, requiring electronic product manufacturers to use USB-C charging interface technology in their products. It also requires small and medium-sized portable electronic devices such as mobile phones, tablets, and cameras, as well as laptops, to comply with the USB-C charging interface requirement by 2024 and 2026, respectively. The IEC 62680 testing equipment GRL-USB-PD-C2-EPR, formerly the USB-IF Association's USB PD certification testing instrument, performs PD protocol certification testing. IEC 62680-1-2 and IEC 62680-1-3 incorporate the USB-IF USB PD and Type-C specifications and are currently used for protocol testing and certification corresponding to IEC 62680. IEC 62680-1-2 primarily defines the USB PD power supply specification; IEC 62680-1-3 is a specification ...
阅读全文

What is FDA Certification & What is FDA Registration?

图片
 What is FDA Certification & What is FDA Registration? I. What is the FDA? The FDA, authorized by the U.S. Congress (the federal government), is the highest law enforcement agency specializing in food and drug regulation. Its full name is the Food and Drug Administration. Strictly speaking, there is no such thing as FDA certification; the FDA itself has stated this. Generally, when people talk about FDA certification, they are referring to the following three types: FDA registration, FDA testing, and FDA approval. ① FDA Registration: Companies exporting food, drugs, and medical devices to the United States must register with the FDA, listing their company and products. Otherwise, customs clearance will be denied; this is a mandatory requirement. ② FDA Testing: FDA testing primarily refers to safety testing of food contact materials, testing of product contact packaging, biocompatibility testing of medical products, and clinical safety testing. ③ FDA Approval: This usually appli...
阅读全文