What is REACH testing? How to comply with REACH certification standards?

 What is REACH testing? How to comply with REACH certification standards?



The REACH regulation of the European Union, like CE certification, is a mandatory requirement for product exports to the EU, with the core being the registration, evaluation, authorization, and restriction of chemicals. The core requirement is that the content of any substance of high concern (SVHC) in the product shall not exceed 0.1%. The inspection checklist will be dynamically updated, and as of early 2026, it has reached 253 items. When applying, select a qualified laboratory for testing to issue a report.


Author: Shenzhen Duomi Testing Technology Co., Ltd

Link: https://www.zhihu.com/question/638830723/answer/2025860054583194656

Source: Zhihu

The copyright belongs to the author. For commercial reprints, please contact the author for authorization. For non-commercial reprints, please indicate the source.

评论

发表评论

此博客中的热门博文

Singapore IMDA Certification

图片
 Singapore IMDA Certification I. Scope of Certification Telecommunications and radio communication equipment sold in Singapore for local use must be registered with IMDA. Applicable Scope: All radio and telecommunications terminal products Examples: Terrestrial mobile radio equipment; mobile/IoT base stations; wireless broadband access equipment; Internet of Things (IoT) devices; dedicated short-range equipment; Ultra-wideband (UWB) equipment; SRD equipment* II. Certification Cycle: There are five product registration types based on product category. The first four are valid for five years and renewable, while voluntary certification is valid indefinitely. 1. ESER Self-Declaration Registration Short-range/Low-power devices (SRD/LPD), such as alarms, RFID, radio detection, field paging and vehicle radar systems, remote controls, telemetry, wireless microphones and video transmitters, wireless LAN and Bluetooth; DECT cordless phones, portable mobile radios (PMR446) and multi-channel ...
阅读全文

Power Bank Safety Upgrade: First Mandatory National Standard Issued

图片
 Power Bank Safety Upgrade: First Mandatory National Standard Issued my country's first mandatory national standard, the "Technical Specification for Safety of Power Banks," was published on March 31, 2026, and will officially take effect on April 1, 2027. This standard aims to end long-standing problems in the power bank industry, such as falsely advertised capacity, substandard battery cells, and frequent safety incidents. The new regulation introduces several stringent technical requirements, mandating that battery cells pass a needle penetration test (without catching fire or exploding), and strengthening thermal abuse testing; it also adds tests for whole-device drop and crushing, requires products to be labeled with a safe service life, and improves various protection mechanisms.
阅读全文

EN IEC 62680-1-3/62680-1-2 EU Electronics Standards

图片
To reduce e-waste, the EU is committed to promoting a unified charging technology and interface that supports a variety of electronic products. On November 23, 2022, the EU issued Directive EN IEC 62680-1-3/62680-1-2, requiring electronic product manufacturers to use USB-C charging interface technology in their products. It also requires small and medium-sized portable electronic devices such as mobile phones, tablets, and cameras, as well as laptops, to comply with the USB-C charging interface requirement by 2024 and 2026, respectively. The IEC 62680 testing equipment GRL-USB-PD-C2-EPR, formerly the USB-IF Association's USB PD certification testing instrument, performs PD protocol certification testing. IEC 62680-1-2 and IEC 62680-1-3 incorporate the USB-IF USB PD and Type-C specifications and are currently used for protocol testing and certification corresponding to IEC 62680. IEC 62680-1-2 primarily defines the USB PD power supply specification; IEC 62680-1-3 is a specification ...
阅读全文